Front Range 4x4 Upcoming Trail Runs - Add a New Trail Run

Results 1 to 20 of 20

Thread: Airing up w/On board air - what are you using?

  1. #1
    Join Date
    Apr 2014
    Member
    #1420
    Last Online
    October 9th, 2023
    Location
    Nederland
    4x4
    05 4Runner
    Posts
    1,090
    User Name
    jayson44
    Real Name
    Jay
    Thanks Given
    71
    Thanked 178 Times in 137 Posts

    Default Airing up w/On board air - what are you using?



    I noticed how many of you guys have OBA systems of some kind. what is everyone using? I saw this video today and the Napa compressor has me VERY interested.

    anyone else use a portable compressor setup? what do you all use for hose setup?



    J.
    ___________
    05 4Runner Sport - 3" lift, 35s & v8 POWA!

  2. #2
    Join Date
    Jul 2014
    Member
    #1546
    Last Online
    1 Hour Ago
    Location
    Bozeman, MT
    Age
    45
    4x4
    1970CJ5 1958WillysWagon
    Posts
    3,694
    User Name
    FINOCJ
    Real Name
    James Orofino
    Thanks Given
    1,272
    Thanked 1,588 Times in 965 Posts

    Default Re: Airing up w/On board air - what are you using?



    I use the superflow mv50....
    https://superflowair.com/products/mv...r-compressor-1
    I've used it quite a lot over the last 7+ years, and while its never failed me, I am not sure I would get that same one again....some of the issues include the hose to tire valve screw on connecter, the low quality gauge (which was never all that accurate, and now is completely non-functional) as well as it seems to get hot and then it pulls a lot of current and blows the fuse (or melts the fuse housing). Most of that stuff can be fixed with some decent replacement parts, so while its cheap and you can afford to make improvements, but that is kind of annoying. It also has a limited duty cycle, and while it says it can run 20 min on and 20 off, that seems to be right at the time needed for me to fill up 4 33" tires from 9 to 25 psi and probably drives some of the overheating. The advertised 2 min seems a bit optomistic...but if/when I get a new one, I'll pay more attention to a higher duty cycle as well as better gauge and hose fittings as well as a bit quieter would be nice....in other words, I'll probably shell out the money for a Viair....that is if this one ever completely dies. So, if you need to go the budget route and don't plan to need it every weekend, it is compact, cheap, and it does work.
    ___________
    James Orofino
    1970 CJ5
    1958 Willys Wagon

  3. #3
    Join Date
    Sep 2011
    Member
    #921
    Last Online
    8 Hours Ago
    Location
    Fort Collins
    4x4
    1990 Jeep Wrangler (YJ)
    Posts
    10,057
    User Name
    Jim
    Real Name
    Jim Williamson
    Thanks Given
    2,462
    Thanked 3,008 Times in 2,005 Posts

    Default Re: Airing up w/On board air - what are you using?



    First iteration - A SuperFlow MV50, reworked.
    www.JimWilliamson.net/misc/2012-11-10--tech--mv-50-disassembly/

    Second iteration - engine driven York A/C compressor with an ARB digital tire inflator. The cost of the inflator had me holding off - though I do find it useful and I would purchase again.

    EDIT: I see you mentioned what do we use for hose setup. For a portable electric, I found I needed to use the supplied hose as near the compressor the hose needs to be able to handle the high temps that will be encountered. At the end of the supplied hose (or far enough away from the heat), one could attach about any inflator or end termination of their choice. The same applies to the engine driven York - output hose temps were high enough that I kept blowing "standard" shop air hoses. I ended up traveling to a hydraulics / hose company and they made a hose for me - 2' of hose (air compressor outlet to the air tank) that would handle the temps out of the compressor.

  4. The Following Member Says Thanks to Jim For This Post:

    FINOCJ (November 6th, 2021)

  5. #4
    Join Date
    Mar 2012
    Member
    #1028
    Last Online
    18 Hours Ago
    Location
    Longmont
    Age
    72
    4x4
    '12 Jeep Wrangler Sport 2.5" lift, 33s, winch
    Posts
    5,073
    User Name
    Tom
    Real Name
    Tom
    Thanks Given
    2,400
    Thanked 1,234 Times in 933 Posts

    Default Re: Airing up w/On board air - what are you using?



    Started with an mv50 which didn’t last long.
    Now Viair 400P.
    ___________
    Tom
    -.- . ----- .-- - -.-.

  6. #5
    Join Date
    Jun 2011
    Member
    #853
    Last Online
    December 23rd, 2023
    Location
    Highlands
    4x4
    2006 Jeep LJ
    Posts
    7,483
    User Name
    Java
    Real Name
    Paul
    Thanks Given
    2,070
    Thanked 1,788 Times in 1,261 Posts

    Default Re: Airing up w/On board air - what are you using?



    I have an MV50 mounted under the hood of my Jeep for a few years now, it's cheap and reliable, a good option. I have Harbor Freight compressors and plug kits in my car and in our Xterra (rarely air down the Xterra, only used it for flats) and they are also cheap and reliable but not fast enough by far for airing up big tires. They also get very hot, it's a couple of minutes until you can put it away. I'd be all over that NAPA one if I was you, I recently got the awning he talks about in the video and it's great. If the compressor is as good it's a sweet deal at under $120.00, and NAPA is everywhere if it fails.

  7. #6
    Join Date
    Aug 2020
    Member
    #2750
    Last Online
    July 30th, 2022
    Location
    Castle Rock, CO
    4x4
    1987 Jeep Comanche, 2001 Jeep Cherokee
    Posts
    154
    User Name
    derf
    Real Name
    Roy
    Thanks Given
    14
    Thanked 66 Times in 48 Posts

    Default Re: Airing up w/On board air - what are you using?



    Viair 400P here.

  8. #7
    Join Date
    Sep 2017
    Member
    #2036
    Last Online
    September 8th, 2023
    Location
    Broomfield
    4x4
    2005 Wrangler Unlimited (LJ)
    Posts
    1,844
    User Name
    open_circuit
    Real Name
    Trent
    Thanks Given
    586
    Thanked 811 Times in 483 Posts

    Default Re: Airing up w/On board air - what are you using?



    ARB CKMA12 under the hood. Used a cheap harbor freight compressor under the hood for 3 years. Motor seized and replaced with ARB.

  9. #8
    Join Date
    Apr 2014
    Member
    #1420
    Last Online
    October 9th, 2023
    Location
    Nederland
    4x4
    05 4Runner
    Posts
    1,090
    User Name
    jayson44
    Real Name
    Jay
    Thanks Given
    71
    Thanked 178 Times in 137 Posts

    Default Re: Airing up w/On board air - what are you using?



    thanks guys! I think the Napa is gonna be the way I go.

    do you guys do all 4 tires at once or just use a single hose?

    J.
    ___________
    05 4Runner Sport - 3" lift, 35s & v8 POWA!

  10. #9
    Join Date
    Sep 2017
    Member
    #2036
    Last Online
    September 8th, 2023
    Location
    Broomfield
    4x4
    2005 Wrangler Unlimited (LJ)
    Posts
    1,844
    User Name
    open_circuit
    Real Name
    Trent
    Thanks Given
    586
    Thanked 811 Times in 483 Posts

    Default Re: Airing up w/On board air - what are you using?



    One at a time. My compressor doesn't have enough CFM to make doing 4 at once worth the trouble. The 4-at-a-time hose looks cool and efficient, but every time I've aired up next to someone with one of those I've been done faster going one at a time. The 4-hose is unweidly.

  11. #10
    Join Date
    Jul 2014
    Member
    #1546
    Last Online
    1 Hour Ago
    Location
    Bozeman, MT
    Age
    45
    4x4
    1970CJ5 1958WillysWagon
    Posts
    3,694
    User Name
    FINOCJ
    Real Name
    James Orofino
    Thanks Given
    1,272
    Thanked 1,588 Times in 965 Posts

    Default Re: Airing up w/On board air - what are you using?



    Most of us use a single hose with simple 12V portable units, but some have multi-hose set-ups. A few have more complex, and even permanently routed air lines as part of of that with a single inlet connection and quick connections at the corners to go to the tire valve.
    ___________
    James Orofino
    1970 CJ5
    1958 Willys Wagon

  12. #11
    Join Date
    Sep 2011
    Member
    #921
    Last Online
    8 Hours Ago
    Location
    Fort Collins
    4x4
    1990 Jeep Wrangler (YJ)
    Posts
    10,057
    User Name
    Jim
    Real Name
    Jim Williamson
    Thanks Given
    2,462
    Thanked 3,008 Times in 2,005 Posts

    Default Re: Airing up w/On board air - what are you using?



    A couple comments to add.

    1) Moving from a portable compressor, unmounted, to a permanently mounted compressor - I do enjoy the mounted style. I might have enjoyed it more with the freakishly hot portable style - so I wouldn't have to deal with the hot potato getting packed and stowed (or left out on a floorboard to cool on the way home from a trail - to pack it up later). The mounted style only needs an air hose to be unpacked (for me it's wrapped up in the engine bay as well, though the inflator is stowed in-jeep). The mounted style doesn't get pulled, tipping over, pulling a power cord to disconnect when the air hose is pulled to the farthest tire.

    2) When I started the York compressor project (because I wanted faster inflate speeds) I started to give serious consideration to simply going CO2 inflation tank. If you haven't, you might give that method some consideration. It's different and offers different pro/con issues.

  13. #12
    Join Date
    Jul 2014
    Member
    #1546
    Last Online
    1 Hour Ago
    Location
    Bozeman, MT
    Age
    45
    4x4
    1970CJ5 1958WillysWagon
    Posts
    3,694
    User Name
    FINOCJ
    Real Name
    James Orofino
    Thanks Given
    1,272
    Thanked 1,588 Times in 965 Posts

    Default Re: Airing up w/On board air - what are you using?



    A permanently mounted compressor is nice...but you have to have space for it. Additionally, for an engine driven system like Jim has, you have to have the engine running, which isn't as much of a problem on modern stuff, but my old carbureted stuff doesn't like idling for 20 min at a time (I run my 12V compressor off the battery with the engine off - keeps my engine from fouling the plugs so much or things getting hot, and no concern over the low idle oil pressure that is notorious on old buick v6 engines.) Additionally, and engine driven unit can be difficult to find space for in the engine bay and brackets and belts are needed to drive it - much easier on older engines with less 'stuff' in there and no serpentine belts either. Permanently mounting an electric unit could work well (a few of our members have that). As Jim says, if you have the space, a CO2 tank is an option...they are fast, but you have to pay to fill them up every so often, and i worry with my overloaded brain that I would forget to refill it, or a last minute, unplanned wheeling trip would happen, and be left cruising to the nearest gas station on 7psi. Additionally, tanks are not small - so for some of us with space limitations, that may be a concern.
    One last old-school option - use a spark plug hose! Engine has to run, but it uses the piston to pump air out through the hose to your tire. Nothing like a bit of unburnt fuel in your tire! At least on a modern EFI system, you could unplug the power to the injector, but they were originally used on old carbs....
    ___________
    James Orofino
    1970 CJ5
    1958 Willys Wagon

  14. #13
    Join Date
    Jun 2011
    Member
    #853
    Last Online
    December 23rd, 2023
    Location
    Highlands
    4x4
    2006 Jeep LJ
    Posts
    7,483
    User Name
    Java
    Real Name
    Paul
    Thanks Given
    2,070
    Thanked 1,788 Times in 1,261 Posts

    Default Re: Airing up w/On board air - what are you using?



    IDK if this is useful to anyone without truetracs, but I only use my compressor to air up the driver's side tires to usually about 45 psi, then I hook up this hose to both front / both rear tires and they balance to each other. I discovered that having different air pressures across an axle has a detrimental effect on my Truetracs, but if the air is exactly the same they are invisible. I do the same when I air down, I lower all my tires then hook this hose up to balance them. Its a simple 10' air hose with two female locking ends. It can do another cool thing, you can see it in the last pic: if you don't have onboard air you can fill your spare to about 40 or 45 lbs, and if you get a flat you can plug it and hook up the hose to your spare and the repaired tire and they balance out at about 20 lbs each.

  15. #14
    Join Date
    May 2019
    Member
    #2618
    Last Online
    July 27th, 2022
    Location
    Nederland, CO
    Age
    47
    4x4
    2011 G-Wagen and 2006 Range Rover
    Posts
    1,092
    User Name
    speedkills
    Real Name
    Shane
    Thanks Given
    496
    Thanked 435 Times in 266 Posts

    Default Re: Airing up w/On board air - what are you using?



    I'm just gonna be obnoxious for a moment and leave this here, won't even try to pretend it's useful for anyone.


  16. #15
    Join Date
    Apr 2014
    Member
    #1420
    Last Online
    October 9th, 2023
    Location
    Nederland
    4x4
    05 4Runner
    Posts
    1,090
    User Name
    jayson44
    Real Name
    Jay
    Thanks Given
    71
    Thanked 178 Times in 137 Posts

    Default Re: Airing up w/On board air - what are you using?



    speedkills previously posted:
    "won't even try to pretend it's useful for anyone"

    showoff.

    J.
    ___________
    05 4Runner Sport - 3" lift, 35s & v8 POWA!

  17. #16
    Join Date
    Apr 2014
    Member
    #1420
    Last Online
    October 9th, 2023
    Location
    Nederland
    4x4
    05 4Runner
    Posts
    1,090
    User Name
    jayson44
    Real Name
    Jay
    Thanks Given
    71
    Thanked 178 Times in 137 Posts

    Default Re: Airing up w/On board air - what are you using?



    Paul previously posted:
    "f you get a flat you can plug it and hook up the hose to your spare and the repaired tire and they balance out at about 20 lbs each"

    I'm pretty sure I've heard other guys doing this. great idea!

    I think I'm gonna go with the Napa and a single hose setup. I love the ideas of the York, but as James pointed out, you need the room and I'm not willing to sacrifice my current AC compressor just for OBA.

    Thanks for all the input!

    J.
    ___________
    05 4Runner Sport - 3" lift, 35s & v8 POWA!

  18. #17
    Join Date
    May 2019
    Member
    #2618
    Last Online
    July 27th, 2022
    Location
    Nederland, CO
    Age
    47
    4x4
    2011 G-Wagen and 2006 Range Rover
    Posts
    1,092
    User Name
    speedkills
    Real Name
    Shane
    Thanks Given
    496
    Thanked 435 Times in 266 Posts

    Default Re: Airing up w/On board air - what are you using?



    I couldn't help myself

  19. #18
    Join Date
    May 2019
    Member
    #2609
    Last Online
    5 Days Ago
    Location
    Littleton, CO
    4x4
    Jeep TJ, Nissan Xterra, Ford E350
    Posts
    255
    User Name
    Trevor?
    Real Name
    Trevor
    Thanks Given
    59
    Thanked 198 Times in 116 Posts

    Default Re: Airing up w/On board air - what are you using?



    On the Jeep and Xterra I use a portable compressor sitting on the winch or on the top of the grille. I put together a little manifold with a ball valve, a schrader valve and a couple of quick connect fittings. It plugs into the output of the air compressor. With a connection like the ones Paul shows on the other end of the hose, I can throw the ball valve to stop the flow and check my tire pressure without kneeling down next to each tire. It's pretty inexpensive and a bit easier on the knees. It also isolates the hose from some of the compressor heat as well.

    I use a Viair 450P. Its only rated to 1.66 CFM but its continuous duty, so it will keep chugging along without getting too hot to bag it up when I'm done.

    I put a ARB twin compressor on the frame of the van, mainly to move as much air as I could. An engine driven compressor would be better, but there is so little space under that hood. I have air chucks in each wheel well, and 1/2 air lines. it takes a while to air up from 30-something to 55psi, but you can tinker with other things without much time spent moving lines around. They both have their pluses and minuses.
          

  20. #19
    Join Date
    Sep 2014
    Member
    #1596
    Last Online
    21 Hours Ago
    Location
    Timnath
    4x4
    2012 Rock Ware Buggy & 2007 JKUR
    Posts
    1,570
    User Name
    newracer
    Real Name
    Michael
    Thanks Given
    174
    Thanked 690 Times in 428 Posts

    Default Re: Airing up w/On board air - what are you using?



    I use a CO2 tank and have a MV-50 and another inexpensive compressor for back up that I have not tried yet. I love how fast CO2 is.

  21. #20
    Join Date
    Dec 2012
    Member
    #1118
    Last Online
    8 Hours Ago
    Location
    Aurora
    Age
    68
    4x4
    03 Ranger FX4
    Posts
    6,018
    User Name
    The StRanger
    Real Name
    Sam
    Thanks Given
    125
    Thanked 551 Times in 484 Posts

    Default Re: Airing up w/On board air - what are you using?



    I’ll have get some pics tomorrow but I run the ARB compressor & tank with a 120 power converter mounted on an
    cutting board.
    If I have to move it I just unplug it and off we go.
    ___________
    In a never ending search for the proper mix of dirt & rock !

Similar Threads

  1. $50 Airing up alternative
    By teamhypoxia in forum General 4x4 Tech Topics
    Replies: 26
    Last Post: January 2nd, 2014, 08:38 AM
  2. New to the board.
    By EKJ in forum Introductions
    Replies: 24
    Last Post: October 11th, 2013, 10:14 PM
  3. another FNG to the board
    By 88Toy in forum Introductions
    Replies: 28
    Last Post: March 5th, 2013, 12:21 PM
  4. Airing Down
    By Brody in forum Newbie
    Replies: 0
    Last Post: January 9th, 2011, 01:50 PM
  5. On Board Air?
    By RidgeRunner in forum General 4x4 Tech Topics
    Replies: 45
    Last Post: July 2nd, 2010, 02:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
BACK TO TOP