3rd gen Taco

[cnstaco]

Front bumper install

[cnstaco]

Hmmm

[cnstaco]

That’s better

[cnstaco]

Leak in front diff is fixed from above pictures and my winch works.

[cnstaco]

Cut some more off the truck.

[cnstaco]

And HC rear from Warfab these guy’s are in Montrose check them out if you have a Tacoma.

[cnstaco]

Ironclads

[cnstaco]

learning to cut

[cnstaco]

Learning short circuit mig

[RockyMtRebel]

Yo Chris!!!! We gotta take the big trucks out together..... I'm having 37" KM3's installed any day now ;-)

[cnstaco]

RockyMtRebel previously posted:

[cnstaco]

Rear shock mount relocation. I went with a 14” Bilstien 7100 short body because the compressed number is the same as a 12” but extend’s to 14. BAMF relocation brackets. Everything diy. I have yet to fully flex this set up but with my leafs I should be around 4” up and 8” down. More to come.

[Paul]

Nice welds.

[open_circuit]

When are we going to see this beast on the trail again? I think you've rebuilt half of the truck since the last time we ran a trail together!

[cnstaco]

open_circuit previously posted:

[cnstaco]

Winter mod time. The truck needs a new battery the VSC light is on again and the steering wheel is crooked. Crawl box it is!

[RockyMtRebel]

damn dude, when are you coming out to wheel? I haven't even seen your truck since it was bone stock

[cnstaco]

Honestly it might be a couple months I have some more plans for the truck but as soon as spring comes let’s Go!

[RockyMtRebel]

Hell yea, you let me know when you're ready to wheel!!

[cnstaco]

Cases are back in and drive shafts are at the shop. Sorry about all the sideways pics don’t know how to fix that.