Need a great welder for D44 rear axle tubes and spring perches

[fredrok]

Since I normally do 100% of my own work, it's new territory requesting help. https://www.youtube.com/watch?v=_VrFV5r8cs0

I have a 110V welder and less than average skills so I'd like to bring my JK to a welder with real skilz and the right equipment to weld the tubes to the carrier properly and while there also weld the spring perches to the axle so I can remove the ubolts currently holding them in place.

West side of Denver would be great since I'm in the foothills off of 70. Can't imagine it'd take more than an :45-1hr and I have a fairly flexible schedule. Please let me know when and how much so we can work something out.

Thanks!

[96EXXLTinCO]

I've got the skills, bit no bigger of a welder than you. Someday.........lmc

[fredrok]

There's always a catch Chad!

[dieseldoc]

I have the skills and for sure have the welder for the job.
Shop is in englwood.
Club rate is 35 an hour.
Have many machines in the shop to pick from.

I am looking at being at the shop Saturday doing a side job.
Let me know if you want to come by.

[96EXXLTinCO]

fredrok previously posted:

[fredrok]

Hey thanks Brandon! My weekend schedule just cranked up this morning so I'll have to get back to you when I have the chance to knock this out. Thanks buddy!

[dieseldoc]

No problem
Let me know when you have time.