Front Range 4x4 Upcoming Trail Runs - Add a New Trail Run

Results 1 to 9 of 9

Thread: DIY gone wrong??? Don't Fret, we can help!

  1. #1
    Join Date
    Jun 2013
    Member
    #1249
    Last Online
    August 28th, 2022
    Location
    Broomfield, CO
    4x4
    97 Dodge CTD, 85 4R, 89 YJ, 04 Kawasaki Mule
    Posts
    2,956
    User Name
    Brucker
    Real Name
    Aaron Brucker
    Thanks Given
    326
    Thanked 442 Times in 342 Posts

    Default DIY gone wrong??? Don't Fret, we can help!



    It's a familiar story we all have been apart of at some point or another, Do-It-Yourself projects. Being a great way to save a little cash when you have more time then money to spare. But they can turn costly quickly if you don't know what to do or don't have access to the proper equipment. Happens all the time, sometimes even to the most skilled of us. So when mistakes happen, don't fret, call a professional for a little guidance and help! You may be amazed at how simple they can make even the most challenging of projects look. Here is a quick example:

    Had a client bring in some steel wheels and beadlock rings into the shop. They had originally purchased them all thinking they would have a fun project that would save some cash. But before long they quickly realized they were in over their head. After several valiant efforts and passes at welding a decent bead around one wheel, they decided to throw in the towel and call us for some help. After a quick conversation they quickly realized that their welder just didn't have the amperage needed.

    Quick look at the wheel in question as it arrived at the shop. You will notice the multiple welding passes that haven't made any decent penetration:





    And here you will see the start of a clean up attempt by the client. After the short time it took to achieve just this, is when they decided it was time to give us a call:




    We were able to sand out the weld beads from the multiple different passes that were originally taken.



    Closeup after removal of the previous weld beads. You may notice some very visible cracks or holes around the edges. This is where the previous weld had not made proper penetration.







    Then ground out a decent sized gap between the pieces to allow for us to get the required penetration.





    Once that was completed, we tacked the pieces together in multiple areas and finally welded it solid, and more importantly air tight.




    Having us weld the rest of the wheels together and repair the one already messed with was still cheaper than buying new, complete beadlock wheels. So in the long run, they were still able to save a little money, and got a great product in return.


    So don't be afraid to get your hands dirty and try a little DIY. Worst case, we will always be here to help if needed!

    Happy trails!

  2. The Following 4 Members Say Thanks to Brucker For This Post:

    Chris (September 30th, 2015),Java (September 30th, 2015),newracer (September 29th, 2015),Patrolman (September 30th, 2015)

  3. #2
    Join Date
    Sep 2011
    Member
    #921
    Last Online
    3 Hours Ago
    Location
    Fort Collins
    4x4
    1990 Jeep Wrangler (YJ)
    Posts
    10,057
    User Name
    Jim
    Real Name
    Jim Williamson
    Thanks Given
    2,462
    Thanked 3,008 Times in 2,005 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    That's a nice, positive post!

    Good read with pix.

  4. The Following Member Says Thanks to Jim For This Post:

    Brucker (September 30th, 2015)

  5. #3
    Join Date
    Mar 2008
    Member
    #1
    Last Online
    November 21st, 2023
    Location
    Port St. Lucie, FL
    Age
    73
    4x4
    4Runner
    Posts
    14,279
    User Name
    Chris
    Real Name
    Chris
    Thanks Given
    576
    Thanked 801 Times in 591 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    Well done post Aaron. I think we've all been there in one way or another at some time. It's nice to see the pics of before and after without ridiculing the diy attempt as we see all to often on forums.


  6. The Following Member Says Thanks to Chris For This Post:

    Brucker (September 30th, 2015)

  7. #4
    Join Date
    Jun 2011
    Member
    #853
    Last Online
    December 23rd, 2023
    Location
    Highlands
    4x4
    2006 Jeep LJ
    Posts
    7,483
    User Name
    Java
    Real Name
    Paul
    Thanks Given
    2,070
    Thanked 1,788 Times in 1,261 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    Aaron- I'm not trying to brag, but I'm a pretty shitty welder myself and the before resembled some stuff I've done... I'm trying to do better and am trying to learn what the causes behind my mistakes look like. am I correct that it looks like part of the problem was a bad ground connection? It seems to me that when I'm not grounded well or too far from my work the bead sits on top more than it burns in, is that what I see in the before?

    Thanks for posting this!

  8. The Following Member Says Thanks to Java For This Post:

    Brucker (September 30th, 2015)

  9. #5
    Join Date
    Jun 2013
    Member
    #1259
    Last Online
    March 24th, 2016
    Location
    Frederick, CO
    Age
    51
    4x4
    2001 Jeep Wrangler (TJ)
    Posts
    336
    User Name
    JFjeld
    Real Name
    Jason
    Thanks Given
    29
    Thanked 56 Times in 41 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    That reminds me, Aaron. I have my weld-on beadlocks from TMI patiently sitting in my garage, all ready for you to weld onto my Cragar Soft 8s. I'll send you a PM soon to get scheduled and drop off to you.

  10. The Following Member Says Thanks to JFjeld For This Post:

    Brucker (September 30th, 2015)

  11. #6
    Join Date
    Jun 2013
    Member
    #1249
    Last Online
    August 28th, 2022
    Location
    Broomfield, CO
    4x4
    97 Dodge CTD, 85 4R, 89 YJ, 04 Kawasaki Mule
    Posts
    2,956
    User Name
    Brucker
    Real Name
    Aaron Brucker
    Thanks Given
    326
    Thanked 442 Times in 342 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    Paul previously posted:
    "Aaron- I'm not trying to brag, but I'm a pretty shitty welder myself and the before resembled some stuff I've done... I'm trying to do better and am trying to learn what the causes behind my mistakes look like. am I correct that it looks like part of the problem was a bad ground connection? It seems to me that when I'm not grounded well or too far from my work the bead sits on top more than it burns in, is that what I see in the before?

    Thanks for posting this! "

    Paul, your first line made me laugh so hard. Thank you for that. A sense of humor when dealing with mistakes and learning from them, is a valuable asset. The main problem here was lack of amperage. Not a big enough machine, not enough power, or improper settings on the welder, not sure which. I could guess 110V machine past it's capacities, but that would be a guess. Another issue could have been proper prep as with all metal work, the cleaner, the better. But truly the problem shown here was lack of proper heat. The filler couldn't penetrate the thickness of metal it needed to and just built up above the pieces instead of burning in.

    Hope that this helps!

  12. The Following Member Says Thanks to Brucker For This Post:

    Java (October 1st, 2015)

  13. #7
    Join Date
    Dec 2012
    Member
    #1118
    Last Online
    4 Hours Ago
    Location
    Aurora
    Age
    68
    4x4
    03 Ranger FX4
    Posts
    6,018
    User Name
    The StRanger
    Real Name
    Sam
    Thanks Given
    125
    Thanked 551 Times in 484 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    My welding is geting better but I still work
    A lot of thing I will still send out..
    A man has got to know his limitations !
    ___________
    In a never ending search for the proper mix of dirt & rock !

  14. #8
    Join Date
    Jan 2010
    Member
    #581
    Last Online
    February 12th, 2016
    Location
    Firestone
    Age
    33
    4x4
    1999 Explorer Sport
    Posts
    817
    User Name
    AccordRanger
    Real Name
    Shayne
    Thanks Given
    1
    Thanked 8 Times in 8 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    Just wondering what a ball park would be on getting the beadwork rings welded on?

  15. #9
    Join Date
    Jun 2013
    Member
    #1249
    Last Online
    August 28th, 2022
    Location
    Broomfield, CO
    4x4
    97 Dodge CTD, 85 4R, 89 YJ, 04 Kawasaki Mule
    Posts
    2,956
    User Name
    Brucker
    Real Name
    Aaron Brucker
    Thanks Given
    326
    Thanked 442 Times in 342 Posts

    Default Re: DIY gone wrong??? Don't Fret, we can help!



    AccordRanger previously posted:
    "Just wondering what a ball park would be on getting the beadwork rings welded on?"

    For decent condition wheels without tires and new rings we charge a minimum of half hour of labor to prep, weld, and cleanup each wheel. This does not include any coating or any other work needed. If you would like a specific, written quote, please contact me at the shop through email (sales@bruckerbrothers.com) or by phone (720-235-9485). Hope that this helps!

Similar Threads

  1. Moody Hill - TD appears to be wrong
    By ExplorerTom in forum 1) Trail Run Planning
    Replies: 1
    Last Post: April 29th, 2013, 10:06 AM
  2. Hi, my name is Jeremy and I'm an... wrong place.
    By Jeremy in forum Introductions
    Replies: 26
    Last Post: December 12th, 2012, 02:30 PM
  3. Correct me if I'm wrong, please...
    By Jackie in forum General 4x4 Tech Topics
    Replies: 21
    Last Post: January 13th, 2012, 02:23 PM
  4. Going Green Goes Wrong
    By Screweder in forum Chat
    Replies: 5
    Last Post: August 4th, 2009, 01:49 AM
  5. this is very wrong
    By Roostercruiser in forum Chat
    Replies: 7
    Last Post: October 15th, 2008, 09:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
BACK TO TOP