Front Range 4x4 Upcoming Trail Runs - Add a New Trail Run

Page 6 of 6 FirstFirst ... 3456
Results 101 to 110 of 110

Thread: Docs 04 TJ

  1. #101
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    So I am stalled out for the install. The guys at NAPA cant figure out the unjoint strap needed with this new yoke. so I will be a few weeks before it goes in.
    I have to figure out the resize issue so I can post pics.
    as well I am now at a hight that a SYE kit has to go in so I dont have a bind up issue, and end up busted.
    so here comes a weekend of work after the holidays.
    This is also forced my hand to get the skid plat done as I will be pushing the engine and drivetrain up to create clearance under the belly. yet still keep the low stance.

  2. #102
    Join Date
    Mar 2008
    Member
    #1
    Last Online
    November 21st, 2023
    Location
    Port St. Lucie, FL
    Age
    73
    4x4
    4Runner
    Posts
    14,279
    User Name
    Chris
    Real Name
    Chris
    Thanks Given
    576
    Thanked 801 Times in 591 Posts

    Default Re: Docs 04 TJ



    Bummer Brandon, delays are discouraging.

    Use this to resize - http://www.picresize.com/
    ___________
    Chris in Florida

  3. #103
    Join Date
    Sep 2014
    Member
    #1596
    Last Online
    16 Hours Ago
    Location
    Timnath
    4x4
    2012 Rock Ware Buggy & 2007 JKUR
    Posts
    1,570
    User Name
    newracer
    Real Name
    Michael
    Thanks Given
    174
    Thanked 690 Times in 428 Posts

    Default Re: Docs 04 TJ



    I like Fotosizer to resize picts.

  4. #104
    Join Date
    Jun 2015
    Member
    #1730
    Last Online
    November 3rd, 2023
    Location
    Denver
    Age
    58
    4x4
    84 CJ8
    Posts
    735
    User Name
    Spieg
    Real Name
    Brian
    Thanks Given
    179
    Thanked 165 Times in 144 Posts

    Default Re: Docs 04 TJ



    Good 'ol Microsoft Paint will also work to resize (scale) photos.
    ___________
    ~Not All Who Wander Are Lost~ (at least not all the time)

  5. #105
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    Sweet thanks for the info....


    Got the right u joint strap kits ( cup holder )

    Had to be from a '76 IH scout!

  6. #106
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    So my TJ has reach a point where it needed some stuff.
    I have years of the 4.10 type has 3.73 in it now and is just not the right gears for the 33's.
    Reat gears are of the JK variety, the JANA kit will put these into my D44
    Rear Yukon grizzly locker
    Front carier for the diff just in case it has 3.55 but the manual has the 3.73......
    Front and rear master install kits rear has the crush sleeve eliminated
    Front brakes are get rotors they are due so some upgraded rotors an pads
    Rear New drums and shoes and hardware
    Steering pump has finally gone enough.....so a PSC replacement will go in as well as a good sized cooler to,keep the type u,see control.
    Front axle seals are getting the treatable type
    And some synergy ball joints
    And front unit bearings just a touch of play so 60 bucks for the,pair and they are getting done.....

    Pics,will come,as,parts come,in.

  7. #107
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    So I had a long weekend of stuffing parts into the jeep.

    The Jana K4 kit:

    This was to be quality parts.....
    Well the set up bearings were tighter fit than wide bearings for the carrier.....grrr!
    Had to source bearings on a 3 day weekend!
    Next the install says the solid spacer was to be .450" well not some much.
    I was sent a spacer that measures .410" so to start with I am all ready short .040"
    Next instructions say start with .100" of shimms, hmmm that would be nice.
    Kit arrived with .080" worth of shimms crap....

    I got to spend half my day building a custom spacer to replace the one I payed for....

    the rest want in nicely after I was able to get preload and depth set right.

    I evidently have a vent axle shaft....made it worse pressing the bearing back on after replacing the seal. This is most likely the culprit of my oil leak..
    So axle shafts will be coming this week.

    The Yukon grizzly I got needed the bolt holes drilled to 1/2 this fast and easy.

    The front was a pain to get out...but I was able to pull the bearings, hone them out to be set up bearings, life is so much better this way.
    Front diff in an set.
    I install ed a set of ten factory Greasable axle tube seals.
    The ball joint were not totally wasted, but they were poping some.
    So synergy manufacturing got the funds for these parts.
    Greasable lowers....sweet
    Replaced the unit bearings as they have 129, 347 miles on then.
    And for $60 for the pair done.

    The slight jump in gears is not totally evident but the low gears like reverse.
    Will see how it does on the hills.

    I got some turning radius back as this locker has good amount of give in it.
    Granted it has like 15 miles one right now....

    Ask all in all a long weekend but it's mostly done.

    Still have steering pump to do, a steering cooler to install as well 5/8"engine lift to install, build trans cross member to bring the t-case up 5/8" as well.
    Build a new skid plate as well.
    ___________
    Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized

  8. #108
    Join Date
    Mar 2016
    Member
    #1841
    Last Online
    June 16th, 2021
    Location
    SW Denver
    4x4
    Poison Spyder buggy, 1999 4runner
    Posts
    813
    User Name
    TJS86TOY
    Real Name
    TJ
    Thanks Given
    169
    Thanked 212 Times in 136 Posts

    Default Re: Docs 04 TJ



    Bummer about the missing parts. Seems like quality parts are a hard find these days, but it seems like you pulled it all together nicely. Ha! Saw your sig. "All I wanted was a pepsi, just one pepsi! " Ya, Im from that gen.

  9. #109
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    Dig deep it to your pockets
    Make it hurt
    How much you makes no difference to me.
    How much you give is your,own choice
    But for me it's the difference between a porch and Rolls Royce

    Got to love ST!

    Any how ya my weekend was kind screwed as someone else made big misstakes.
    Grant it I didn't measure every thing when the box showed up.
    So my bad there but dam man, pay a guy 9 bones for a kit he puts together you would think the stuff would be right.
    ___________
    Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized

  10. #110
    Join Date
    Aug 2014
    Member
    #1589
    Last Online
    July 7th, 2023
    Location
    Lakewood
    Age
    50
    4x4
    2017 JKUR Recon
    Posts
    2,946
    User Name
    dieseldoc
    Real Name
    Brandon
    Thanks Given
    1
    Thanked 397 Times in 351 Posts

    Default Re: Docs 04 TJ



    So I have talked with Carl Jantz himself about the issues I had with his kit.

    The solid spacer was being made by an outside manufacture.
    Carl has gone through his parts on the shelf.
    Of the 50 he has on the shelf 3 are out of parallel.
    They very from .410 to .430 has 5 that were correct.

    The shimms are supplied from Revtek or Yukon seems they change the amount of shimms on a regular basis.
    So he is going to be building the packs himself after he recives them from the supplier.

    The bearing was NAPA giving him the wrong stuff....

    So in all things will get better with his stuff.

    Mine got done and works nicely.
    ___________
    Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized

Page 6 of 6 FirstFirst ... 3456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
BACK TO TOP