Jim I think it may be haven't opened up to check to be sure.
Jim I think it may be haven't opened up to check to be sure.
Bronco is getting new shoes, I ordered them today. This link is from 4 WP page but I did not pay their price I got 4 brand new tires for $750 + shipping to my door.
Maxxis Trepadors@ 4WP they are $317 each + shipping, so I did save a nice piece of change
ajordan1975 (July 24th, 2015)
Wow that's quite a discount! Only $187.50 per tire. Impressive. Care to fil us in on where the hot deals are?
Aaron I bought them from a tire center in Nebraska, they have good deals up on ebay. That's where I bought these, if anyone would like a link to their store on ebay let me know and I'll post it up.
Post up
Nice tires looking forward to hear you thoughs/review on them.
Cr33p3r (July 31st, 2015)
Last Friday the 460 blockand lower end went into Madcap Racing to be gone thru and when its done I'll be picking up a milled, bored, and possibly stroked long block. I am looking for a set of aluminum heads for it as I can piuck up a set for less than what it cost to rebuild the stock heads.
Figured it has been awhile since I did an update. Madcap racing had the 460 for 2 months and never did anything with it so I took over to Rob at Blue Oval Perfomance at the beginning of October and he said right off the bat that it needed to be bore .30 over. He was going to go thru it after cleaning and magna flux everything for carcks, install new bearings (cam & crank), larger pistons, Edelbrock cam & lifters and timing gears, new rear sump oil pump.
On that note I have not herard from him and cannot get a hold of him on the phone so I am going to make a trip down there to see what's going on. On a different note I got Val hooked on wacthing Diesel Brothers and she asked me why don't we just put a diesel in the bronco? What a gal I have! So I am looking for a F350 diesel/automatic dually for a decent price because oall that will be used is the rolling chassis and motor/trans.
Which means either I will be selling the 460(571)&C6 or installing it in the 57 and selling the 347 stroker & C4.
If you let go of the 347 let me know. I might be interested in it for a side project.
It's been a long time since I posted on the site and done any updates on the Bronco. Currently pulling the stock 351M and C6 out and installing the new 468ci and C6 that's been rebuilt.
Very nice!
Cr33p3r (October 11th, 2018)
Progress!!
Cr33p3r (October 11th, 2018)
Nice!
___________
Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized
Cr33p3r (October 11th, 2018)