Landmissile previously posted:
"Are you rebuilding the rockers as sliders"
No, installing 1/4" wall structural 2" x 2" directly under the rockers with the same 2" x 2" running back to the unibody stiffeners I welded on his Heep two weeks ago. It's more the "how do I get the damn things to fit tight with the beat up rockers." I didn't realize that the floor dipped down in front of the B pillar as much as it did either, so had to remove one of the three kickers I'd already built and welded to the slider itself, cut it at a bit of an angle so it'd fit under the floor pan and do the one in front of it the same way. .And I'd originally planned to drill the pinch seam about 10 spots on each side, mark the slider tube, drill and tap it for grade 8 1/4" 20 bolts, but the pinch seams aren't in good enough shape for that. And I really think mounting a set of sliders should be done in a "double shear" type of mounting arrangement, for lack of a better term.