Hope this works!

[Heather]

Good luck! Looking forward to the write up!

[MelloYello]

You can do it!!!!

[Hypoid]

You are going to have a loooooooooooooooooong weekend! Don't forget Mother's day.

Last weekend, I replaced the clutch for Bronc 17113. I couldn't get the flywheel out in time to have it resurfaced, so I went to O'Riley and bought a new one. When we got his truck together, started up, it shrieked like a Banshee and spit sparks out the bell housing.

The new flywheel is the prime suspect. I'll have it off the truck tomorrow night. If I can get it returned Friday night, I'll have the old clutch in to CarQuest early Saturday for resurfacing.

Where are you doing all this work?

[Popsgarage]

Mike, go talk to Bill @ Mountain High Performance. I believe he charged me $25 or $30 dollars last time and he always does nice work. He's not to far from the house. 52nd and Ward to the west of ATS diesel. The number to his shop is 303-420-6218.

[glacierpaul]

Rear main seal.....oh for joy!! Good luck

[Gossamer]

CodeXJ previously posted:

[Hypoid]

Thanks for the tip Jon! I'll have to give him a hollar.

CodeXJ previously posted:

[Popsgarage]

He's always treated me really well.

[Hypoid]

Closed on Saturday. :(

[Popsgarage]

Hypoid previously posted:

[Hypoid]

I'm putting words in his mouth. When I called, he said "I'm closed today."

Coincidently, both the Carquest stores who say they can do the work, don't have anyone to reface the flywheel today. I'm trying the store on Old Wadsworth next.

[Popsgarage]

If nothing else, drop it off in front of the door with your name, number and what needs done written on it and on Monday he'll give you a call saying it's done. I've done that a time or two.

[Hypoid]

It's all back together now. The back side of the flywheel at Advance, measured within .001" of the factory unit.

Maybe by the afternoon,my Mrs will get bored with me and send me back to the workshop. Once the fluids get topped and the clutch gets bled, I can take it off the stands.

[Popsgarage]

Good to hear!

[Hypoid]

This truck went home tonight, flywheel still rubs.

I did not see what was in front of me. When I took the original off, there was damage to the block plate caused by the old flywheel rubbing. My landlord looked at it and told me the crankshaft was walking, because the crankshaft thrust bearing was worn out. He blames it on driver habit, sitting at a stop with the clutch pushed in.

Cody, I hope your weekend went better.

[Rick]

Hypoid previously posted: