I've done some internet searching and I have come up with some inconsitant info. I'm trying to find the deminsion from inside to inside on the shackle on both the frame end and spring end. If anyone can help me out it'd be great! Thanks!
I've done some internet searching and I have come up with some inconsitant info. I'm trying to find the deminsion from inside to inside on the shackle on both the frame end and spring end. If anyone can help me out it'd be great! Thanks!
I need the info for both the front and rear shackle if possible, thanks again
The fronts have 2 different widths. The flare out. The top is wider than the bottom to clear the rear frame rail. I don't have a solid axle so I can't measure them. The rears are straight cut. I can get the width off my 87 as it is the same, but may take a few days. Busy with work.
So did you get yourself a 4Runner, Chris?
I could have measured them for you.