Here's a slight breakdown of bin sizes:
Depth
Width
Height
Qty
Type: Posts; User: freerider15
Here's a slight breakdown of bin sizes:
Depth
Width
Height
Qty
I'm just up off Vine, and you can feel free to come by and take a look.
Whether not you leave with zero or a hundred is up to you! :D
I've got a load of Stacking Plastic Storage Bins Of All Sizes, great for the shop/garage/home.
Most of these are Akrobins brand, so not "low end" bins.
I have quite a few sizes, and large...
Brand/model of the stuff?
*might* be interested but would like to know.
Well, finally got mine in!
http://i952.photobucket.com/albums/ae8/Freerider2011/Buggy%20Build/14991070_10154299445693393_5749119352644620191_o_zpsz6wrj0hi.jpg
Ouch...sucks that it took out the ARB.
I just recently put 4340 Yukons in my 14 Bolt just for more piece of mind, and since I don't want to lose my Detroit.
The waterfall up to the V-Notch has...
I'm looking to clear out my stock of Single Row LED Light bars.
These are physically the same as the dual rows, they just use 10W CREE's instead of 3W CREE's.
Sizes / Watts / Lumens / Price:
...
(1) Walker Evans beadlock for sale.
Its a 17x8.5, 5 on 4.5, 4" backspaced wheel.
Comes with a 35x12.5R17 BFG KM2 that has a very small sidewall puncture. Tire could very well be plugged...
As a note:
I will be in Longmont Saturday from ~12-3pm at Lefthand Brewery.
I will then be in Denver at Red & Jerry's for NAXJA's Meet & Greet (with an RTI Ramp!) from ~3pm until sometime that...
Yeah I figured for $5 they're worth going at.
Though building your own lets you make it perfect!
I'm going to head out with a friend (another CSU Alum) for the last weekend of EJS.
My buggys needs a couple things done, and his build isn't done yet...so we're going to go hang around town and...
:D Thanks! Was actually going to try and post up about the M&G if you hadn't already.
I have quite a few harnesses that came with an LED order (I'm the owner of JADFab), but were the wrong harnesses. So instead of retrofitting them all, I'm looking to try and offload them. I currently...
Hey everyone, a little more than a few weeks away from ColoradoFest 2015 in Buena Vista, Colorado!
Feel free to visit the ColoradoFest 2015 Sub-Forum on NAXJA.org for all the info!...
Yup :D
Luckily there's four of us!
Bars going out the door daily, let me know what you're in the market for and we can get you set up!
I can guarantee it would be worth it!
Dinner at Tomken Thursday should be great, and then Friday we'll have some killer BBQ (full day on the smoker), followed by the raffle that many are jones'n...
Hey everyone, as I know there are some XJ people in here, I figured I'd throw this up.
http://i952.photobucket.com/albums/ae8/Freerider2011/1NAXJA-2015_zpsgfwsvvyb.jpg
Got and XJ and interested...
Ah ok, yeah that's an akward mounting width. Closest would be the 14" at ~13.25" but that's still out. Yeah let me know if you end up interested in one for something out and i'll see if there's...
Gotcha, makes sense!
Since your local (or you used to be), I'd more than welcome you to come by and take a look and do some dry fitting to see it anything would work.
I'm guessing you mean the hole to hole mounting width between the feet?
I can get exact measurements, but for a "rough" but still within ~.25":
- For feet facing outwards, add 1.5"
- For feet...
Some install pics behind the grill:
http://i952.photobucket.com/albums/ae8/Freerider2011/JADFab/0314151503b_zpsrozgsnfx.jpg
...
Just a heads up, we now carry an array of mounting accessories including JK lower A-Pillar Mounts, tube clamp mounts, and Ford Raptor mounts!
14" bar mounted on the bumper hoop of an MJ, fits perfect! (with a '97+ conversion).
http://i952.photobucket.com/albums/ae8/Freerider2011/JADFab/0314151518a_zpsmrhp2uua.jpg
...
I often tell people that while certain "cheap" LED Bars off two certain un-named website's might be appealing...it can be a bad gamble. Here is a great example of what I mean. This customer bought a...