Search:

Jim:
Yes the transfer case was working correctly prior to installing a long arm kit on the xj.
The bolt was in the unibody so not related to the transmission or the TC,.
The transmission and...

Jim; I just went out and tried that, and it popped out of gear again. I guess the next step is to remove the tc and see if I can tell what is happening.

Jim
I have not tried that, but will give it a try.
Paul
That is an option but I do not wat to start something that I cannot finish, and be in worst shape.

It is popping out in all gears.
Curious if it cod be the tabs o the shifter fork?

Well the jeep saga continues. I got the stud out of the unibody, and got the long arm kit installed then, on the way to the alignment shop the transfer case jumped out of 2wd into a false neutral...

Yes it is the stud for the crossmember.

Have tried fire and ice with no luck. Had a neighbor come over and weld a nut onto what remained of the stud, that broke off when he tried to loosen it. Tried to drill it out but the extractors...

Does anyone in the Roxborough, Littleton area have an acetylene torch, and some experience using it . I have a stud stuck in the frame of my 2000 xj and after breaking 2 extractors off I have run...

I do have an RPM gauge, and there was no change in rpm when it happened. It only lasts for a second or two but it is like the tranny disengages, then reengages, causing the jerking sensation.There...

While returning from OurY in our 2000 xj with auto transmission, 242 transfer case, and 456 gears. We developed a bucking sensation while driving on flat ground while in overdrive. Downshifting to...

Thanks everyone for the info. I will check everything and make a decision on what to do.

I recently had a ford 8.25 rear axle put in my 2000 xj. The abs light is on, and I assume it is because the wiring haness for the jeep, and ford axle do not match. Does anyone know how to eliminate...

Headed there in a week to spend a few days with the brother in law and some of his friend wheeling the area. Wife likes t walk the cemetery in Silverton, and read the old gravestones.

My nephew has a 1999 xj that he has put a 2" budget lift on, and developed a drive line vibration. Talking to his dad they have put wedges on the rear axle, chrysler 8.25 and replaced all the u...

I hope everyone that was there drank a tall COORS beer for me when you were done, cause I was stuck making more of it at the brewery. Looks like We missed a really good time. I guess this means the...

Steve dont know exactly wear you are but my wifes 4 runner has been taken to paris tire at Leatsdale & Oneida. Owners name is Jeff Stone. very honest guy does good work, and stands behind...

Well we all must have been thinking the same. Got ahold of Josh at sffcustoms, and he is going to build me a 8.8 with 454 rears and replace front with the same.
Best part is he can do it the end of...

Called the guys a edge 4x4 and they cannot get me in till the middle of april, so I guess I have time to figure out exactly what I want. Thanks again all for the advice will see what happens.

A little background first. We have a 2000 xj, automatic, with 3 inch lift, 31 inch tires, Dana30 front axle, and chrysler 8.25 rear, and 3:55 gears. I have come to the realization that I need...

Went to this pllace for some repaiton my old CB. He did an excellantjob, and has a good selection of newand used equipment to buy, and seems very helpful with the advice if asked.
Radio Service...

Read an article the other day about removing the rear sway bar on my XJ, saying it was not necessary, and increased flex. Was wondering if anyone has done this, and what they think. Mine is a 2000...

Stu: did you already sell the sliders. Cant find them on craigslist.

I do not like to rag on buisnesses, but in this case I think it necessary to warn other people about this buisness.
Off Road Armour out of Peyton Colorado, is acompany I would stay away from.
I...

Found itnever mind.

Max: downloaded avenza app but have no idea how to get to colorado mvums