Search:

If your looking for the C-6 make sure its a 31 spline out put (4x4 transmission, same problem your having with the C-4). I have a small block C-6 in my Ranger and it was out of a 84 F-150 (was bolted...

Watch the case on those if your gonna lincoln lock it. The Samurai had the steel cases and the sudekick/Trackers had aluminum (or something like that). A lot of Samurai guys just pull the R&P and put...

I know when I put this system in my old 73 FORD it was just a plug and play affair. Pulled the old points out, put the Pertronix system in and it ran great (no more burnt points). This was more than...

Check out places on-line like Cal-Mini, Low Range Off Road and ZOR (Zuk's Off Road. Myron is the owner and a super great guy to deal with). Trail Tough is another company that carries parts for...

Another Explorer owner. I run a 94 on 35's with lockers front and rear (had it in some pretty nasty places). We (Explorer 0wners) need to band together more. Yours looks like it is very capable....

Does it have the overhead console?

I made the hole in my plenum under the heater core (on the driver side). it was plugged up under it and was stopping the air flow. Also check the other side on the blend door. Sometimes they get to...

Glad you got it figured out, but just for future reference these are what my lugs look like....
http://img.photobucket.com/albums/v289/BLOODBANE81230/20150816_180930_zpsoric2133.jpg

Pro-Comp has a anti theft lug that 4wheel parts just sent me for my new rims and tires on my Ranger(wrong size anyways). You might try hitting up a 4wheelparts store and seeing if they have what you...

Here is my running the rocks in your last pic....

http://vidmg.photobucket.com/albums/v289/BLOODBANE81230/Trail%20Runs/MOV00198.mp4

Been a little while since I have been up there Matt. I know my Explorer used to handle it pretty well. Last time we were up there we ran Saran Wrap as well.......

I did have my Explorer for sale (avatar pic), but got tired of all the low ballers. There are a few around here if I can catch up with them I can check them out for you. Lots of mild lifts, and...

I understand. I used to have room. I did my swap in my garage, but now we put the Challenger in there (my wife's car) and I put 2 Samurai's in there (its a 2 car), plus my motorcycle and all the crap...

Welcome to the group. My only warning is once you get started, it goes downhill pretty quick. you will do a trail, then you will want to do a tougher trail, then a tougher one, etc... the mods start...

If I remember correctly those are low numbers on all cylinders. I would start thinking about a rebuild or even better a engine swap.

My folks knew a hermit back in the 70's that lived up in the Waugh/Black Mountain area. He was a over the road truck driver that got strung out on pills and he moved up there to get off them. He had...

Ive had to cut back on my wheeling a great deal (I started dialysis in January) and just getting things back in line now. I had let my rigs kinda go downhill when I was sick last year (went as long...

Looks like your giving it a real good going over. I have a 87 TinTop. The snatch is only really needed if you go with the deeper transfer case gears. I run the 6.5:1 in mine, 3:73's in the axles. The...

I had heard there were a couple of bad wash outs. Thanks for the pics.

Carb cleaner will do the same thing. Spray around all the vacuum lines, base plate, throttle linkages (butterfly). If RPMs increase you have found your leak.

The MYSIDE is great unit and Myron...

Everytime I have been out with members of this group we have spotted each other. I usually run with Larry Hull, and I will always go where he directs me. I have wheeled with Larry since 2000 though...

I went with a Nine Eagles Galaxy Visitor 3. A little better quality, but not so much that if you crash it, it will cost you your first born to replace it. I want to go with the DJI, but I need some...

The 1.6 16v swap is really an easy swap. I found a wrecked Sidekick, pulled the engine, engine wire harness, and power steering off, and parted the rest of the car out. Rebuilt the 1.6, had MY cut...

Yes call Myron (MY) at ZOR (phone number 928 567-3061). Super great guy. He also sells a kit called the MY-SIDE which uses a Harley Carb. If you have the original Hitatchi carb, they can be finicky...

Thats a fun raod. Was up there in '13 with the Suzuki guys. did the Punchbowl over to Marble then back to Crystal City and back through Lead king (I think that was the route) Very scenic and the...