PDA

View Full Version : Strong Box Conversion



Cr33p3r
July 11th, 2014, 08:56 AM
Has anyone on here ever used one of these setups? It looks easier than doing a full on doubler setup. They have various conversions available like using the planetary gear from the 1350, 1354, 1356 they also have to where your final gearing will be either 2.4/1 or 2.7/1 low range. this multiplies the torque to the wheels. Below is the figures straight from their site using with the NP205;

Strong Box + NP 205F = 19.25" - 20.5" long to center of rear yoke
1:1 Hi / Hi
~2:1 Hi / Low
2.7:1 Low / Hi
5.4:1 Low / Low
2.7:1 2wd Low without modifications to NP205

(figures are for the 2.7:1 low range)

http://www.behemothdrivetrain.com/ST...RIVE_KITS.html (http://www.behemothdrivetrain.com/STRONG_BOX_UNDERDRIVE_KITS.html)

redneck23ms
July 11th, 2014, 04:59 PM
that is a full on doubler. not really any difference between it and any other doubler. i have one (231/300) sitting in the shed waiting to get installed

CS79bronco
July 11th, 2014, 06:31 PM
Sean, I posted on RMFTC.