PDA

View Full Version : Dual Transmissions



4runner freak
April 3rd, 2008, 01:18 PM
Although it boggles peoples minds, this is the path I'm heading down.
I thought I'd share some of the reading I've been doing.

Csudman's Truck (He also sells adapters now)
http://www.pirate4x4.com/forum/showthread.php?t=301670
http://i212.photobucket.com/albums/cc116/336wheeler/11-10-07_1318.jpg
http://users.adelphia.net/~csudman/4x4/Final.jpg

Here are the adapters that he sells
http://www.pirate4x4.com/forum/attachment.php?attachmentid=320055&stc=1&d=1187143362
http://www.pirate4x4.com/forum/attachment.php?attachmentid=320056&stc=1&d=1187143362

Xtoys' Truck
http://www.pirate4x4.com/forum/showthread.php?t=132841
No pics, they are too old

4Runninfun
April 3rd, 2008, 01:46 PM
I have read about it over on pirate when i first saw them doing it. I'm really curious to see how your truck comes about.

4runner freak
April 3rd, 2008, 03:54 PM
chadburgin's truck
http://www.pirate4x4.com/forum/showthread.php?t=539772
http://img.photobucket.com/albums/v438/csudman/Chad/Toy%20Build/100_0819.jpg
http://img.photobucket.com/albums/v438/csudman/Chad/Toy%20Build/100_0835.jpg
His trannys using a csudman adapter


mountainguyed67's truck (IH trannys)
http://www.pirate4x4.com/forum/showthread.php?t=625659

http://www.youtube.com/watch?v=xAADEoJpTFQ

Dual trannys in a 1948 CJ2A Willys
http://www.bc4x4.com/fv/2000/colson/colson.cfm
http://www.bc4x4.com/fv/2000/colson/colson-18.jpg
http://www.bc4x4.com/fv/2000/colson/colson-11.jpg

4runner freak
April 4th, 2008, 07:59 AM
I actually got my adapter from a guy named Jason in Littleton (Was Automotion now is Repost, on Pirate4x4)
http://i269.photobucket.com/albums/jj66/4runnerFreak/4runner%20Pics/DSC00283.jpg
I'm going to run a L52 in the front, W56 ******* Tranny in the back.
The W56 has '88 Internals, '94 front housing and an '88 G54 rear housing(To mount to my forward shift t-case).

The W56 is still on my workbench in pieces(It had broken shift linkage that I fixed).
One of these days I'll get it all together and put in.

I need to lift the truck first though.

I also need to massage(With a big hammer) my extra gas tank to get it to fit.

4runner freak
April 4th, 2008, 08:35 AM
Here is some more reading material

Myanarchy's truck
http://www.pirate4x4.com/forum/showthread.php?t=551706
http://i40.photobucket.com/albums/e220/myanarchy/doneside.jpg
http://i40.photobucket.com/albums/e220/myanarchy/dualtranny.jpg?t=1167335950

JLToy's truck
http://www.pirate4x4.com/forum/showthread.php?t=465484
http://i80.photobucket.com/albums/j161/jltoy/Im001847.jpg
http://i80.photobucket.com/albums/j161/jltoy/Im001815.jpg

Chris
April 4th, 2008, 08:48 AM
Very cool, very ambitious, I'll be watching to see how this goes.

4runner freak
April 4th, 2008, 08:51 AM
Unbreakable's
http://www.tacomaterritory.com/forum/attachment.php?attachmentid=1372&d=1123243163
http://i269.photobucket.com/albums/jj66/4runnerFreak/4runner%20Pics/dualtranny1.jpg
http://i269.photobucket.com/albums/jj66/4runnerFreak/4runner%20Pics/dualtranny4.jpg
http://i269.photobucket.com/albums/jj66/4runnerFreak/4runner%20Pics/dualtranny2.jpg
I can't find pictures of the trucks it was in.('79 yellow Toy and then a '91? 4runner)

4runner freak
April 4th, 2008, 10:11 AM
Here is the gearing breakdown I will have using a L52/W56/2.28 gears in T-case/4.10 in Diffs

bskey
April 6th, 2008, 10:51 PM
Wild! I had never heard of this; learn new things every day. Where does your transfer case shift knob end up?

4runner freak
April 7th, 2008, 12:23 PM
Wild! I had never heard of this; learn new things every day. Where does your transfer case shift knob end up?

Pretty close to the hip.
Here is the placement in MyAnarchy's truck
http://i40.photobucket.com/albums/e220/myanarchy/truckshifters.jpg?t=1168902877

Mine will be further forward because I am using a L52 for the front tranny(It is ~6" shorter), and a forward shift case.

bskey
April 7th, 2008, 03:19 PM
Huh.... would you still use dual transfer cases too?

4runner freak
April 8th, 2008, 07:04 AM
No! The dual t-case lever would have to be shifted be the person in the back seat(in a 4runner) or bed(in a truck).
Plus I don't think I need 848:1 or even 412:1 gearing.
That would be CRAZY slow.
http://i269.photobucket.com/albums/jj66/4runnerFreak/Dualtrannyt-casegearing.jpg

4runner freak
April 8th, 2008, 07:28 AM
Ok since you asked about dual t-cases.
Here is a guy that is running 5.0?? in the t-case.
I don't know which trannys he is using, but in my tranny setup, if I ran 4.7s in the t-case, that would give me 315:1 1st/1st/low or 390:1 in Rev/Rev/Low
http://www.pirate4x4.com/forum/showthread.php?p=8112738#post8112738

Patrolman
May 27th, 2008, 04:02 AM
Do you know what the link is to the site for the adapters for sale? Tried to find them. No luck.

Brody
May 27th, 2008, 04:54 AM
Jeff

Go to the Toyota FAQ in the Toyota section and you should find the dual tranny stuff. If it isn't there, it is probably posted on pirate4x4 somewhere.

4runner freak
May 27th, 2008, 08:03 AM
Jeff,
csudman on Pirate makes them.
I'll try to get a good contact for him.

gm4x4lover
May 27th, 2008, 08:20 AM
What does that do for you're rear drive line angle?? I know that i my k5's with a 203/205 doubler there is a small amount of concern.

4runner freak
May 27th, 2008, 09:25 AM
What does that do for you're rear drive line angle?? I know that i my k5's with a 203/205 doubler there is a small amount of concern.

Here is a pic of csudman's rear driveshaft.
http://img.photobucket.com/albums/v438/csudman/Yota/Buildup/Picture001.jpg

Some people have been able to do a direct driveshaft swap(front in the back, back in the front)

Patrolman
May 27th, 2008, 09:39 AM
Yeah, I know that the entire drivetrain should fit under my single cab. I wasn't all that worried about angles. The CV should help too if I decide to have a shaft made. Will look at all my options along the way.

I browsed all over for Csudmans adapters. Neither Google nor Yahoo found them. I didn't find any link in any of the dual builds either. Appreciate a link!

4runner freak
May 27th, 2008, 10:13 AM
Myanarchy has a standard cab and swapped the front driveshaft to the rear. He moved the rear axle back an inch. Here is a picture of his rear DS from his build.
http://www.pirate4x4.com/forum/showthread.php?t=551706
http://i40.photobucket.com/albums/e220/myanarchy/dshaftangle.jpg?t=1168886095

Brody
May 27th, 2008, 06:45 PM
No help with the dual link, but I'll post if I can find something.

If you need a CV, go to Colorado Auto Parts and buy a bent Yota shaft, damaged from where they fork lifted it, fo cheap and have Englewood Driveshaft do a new one off of that. The last shaft I did that way cost $15 at CAP and the rebuilt one an even hundred. So for $115, I got a new CV shaft. Check the u joints first for play as they are expensive to have redone.

Brody
May 27th, 2008, 07:49 PM
I just googled 'dual toyota tranmission install' and got a bunch of hits. There are a couple of build threads/links on the pirate 4x4 forum, some of which it sounds like you looked at, but one has a reader's build link for his duals. I didn't have the time to follow it very far and the internet connection in Jefferson sucks, but you might try following the pirate build link. Sounds like he has his up and running with a 186:1 crawl and spent only $60 for an adapter of some kind.. Not bad at all. Mine is 233:1, but I did this with dual cases and it it is way sick. I can get out of the truck, go talk to people and get back in the truck and the truck has gone 10'. Course it takes forever to get over an obstacle, but that is why it is called crawling, I guess...
The difference between 186:1 and 233:1 is about .35mph...maybe?

BTW, what do you have left to do? My friend Bear, 4LoLo, was thinking about doing this to his and did some research on it. You might want to PM him and see what he has to say.

4runner freak
May 28th, 2008, 08:31 AM
Brody,
I have a very limited amount of time I get to spend in the garage, so at the moment I still need to get the rear tranny put back together(it had a broken shifting fork) and get a set of '89-'95 forward shift t-case shift rails(the t-case I'm putting in is an '88 forward shift(It has the longer shift rails)).
Once I get the rear tranny back together, I'm going to try to bolt them together and see how well I can get them lined up.

I believe that Bear knows I'm working on it.
We just need to talk him into moving from the south booneys to the north booneys. :)

If you have the skills and the time, you could make an adapter for next to nothing. I'm hoping that the adapter I picked up will work. Otherwise, I'll make my own.

Patrolman
May 28th, 2008, 09:44 AM
Yeah, I have searched all over the net for different things. I have found about 5 different dual tranny sites, all of them apparently using home brew adapters. The adapters are pretty simple, but I figured if they were cheap enough to buy, why bother making one. They are a lot simpler than a dual t-case adapter, so figure they likely won't cost as much.

I think I am going to eventually spend the $ on a dual t-case for the 4Runner. Wanted to tinker with the truck and put in the dual transmissions. Have a couple builder transmissions already, so may as well make the most of them!

4runner freak
May 28th, 2008, 09:58 AM
Jeff,
csudman on Pirate makes them.
I'll try to get a good contact for him.

You can PM him on Pirate4x4 if you want.
Here is a PM he sent me a while ago.


I'm selling them for $275.00 plus shipping of $13.95

Thanks
CJ

4runner freak
May 28th, 2008, 10:06 AM
I was going through my email and found one I had sent to myself regarding dual trannys
Some of these links are the build threads I have listed above, but some is other info.


http://bb.bc4x4.com/showthread.php?t=112300
Speedo cable lengthing (http://pirate4x4.com/forum/showthread.php?t=303294)
Marlin Speedo cable extension (http://www.marlincrawler.com/htm/transfercase/tcase_ac.htm)
http://pirate4x4.com/forum/showthread.php?t=33366
http://www.pirate4x4.com/forum/showthread.php?t=486688
http://pirate4x4.com/forum/showthread.php?t=578354
http://www.evolutionmachine.com/index.php?showtopic=1641&st=0
http://www.yotatech.com/f88/1980-lwb-pickup-build-117955/ (http://www.yotatech.com/f88/1980-lwb-pickup-build-117955/)
http://forums.off-road.com/toyota-suvs-trucks/69192-dual-transmissions.html
http://pg.photos.yahoo.com/ph/unbreakabletoyota/album?.dir=/fa6c

Patrolman
May 28th, 2008, 10:27 AM
Appreciate the info Danny! Will have to look at the links. I am sure that I already have several of them in my favorites.

$275 is kinda steep for a simple piece of steel. I can basically get a dual t-case adapter for the same price. Already have a top shift t-case that I need to put to use. Might just try building my own first. Can't be $275 worth of my time.

4runner freak
May 28th, 2008, 10:50 AM
Appreciate the info Danny! Will have to look at the links. I am sure that I already have several of them in my favorites.

$275 is kinda steep for a simple piece of steel. I can basically get a dual t-case adapter for the same price. Already have a top shift t-case that I need to put to use. Might just try building my own first. Can't be $275 worth of my time.

I agree with the price, but his adapters are definetly not simple. He has a 0deg and a 10 deg mounting built into it. Another benefit I see to his adapter, is that you bolt pieces to both tranny's before bolting it together to allow for perfect alignment.

I am hoping that the one I have will work well, but it has to be bolted completely to one tranny and then bolted to the other, so I will have very little adjustment.