Front Range 4x4 Upcoming Trail Runs - Add a New Trail Run

Results 1 to 4 of 4

Thread: XJ starting problem solved

  1. #1
    Join Date
    Mar 2008
    Member
    #103
    Last Online
    August 9th, 2012
    Posts
    10,588
    User Name
    Brody
    Real Name
    Pete Brody

    Default XJ starting problem solved



    I have had a starting issue with LaDawn's Jeep Cherokee for awhile and have been trying to diagnose it. I chased all sorts of threads and posts on the internet, literally reading hundreds of threads on many forums. Seems like the basic 'engine turns over, no fuel/spark/no start' is a rather universal problem that even dealerships can't sort out.

    Turns out that there are two recurring fixes, neither of which is found in dealer information, Chilton's or Haynes. Here they are:

    There are two screws that hold the cover plate on to your PCM/ ECU. This is located behind the coolant overflow on the passenger side of the rig. Jeep made these screws too long by about 1/4" and they tend to short out the circuit, sometimes intermittently. Remove the overflow. Pull the connectors off. Take a Torx screwdriver and back the screws out 1/4". If this fixes the problem, replace with shorter screws or grind 1/4" off old ones.

    The second fix came about after reading two sentences in one of the threads. " To check to see if your Crank Positioning Sensor is good, unplug the plug from the passenger side of the motor that goes to your sensor (located on the driver's side of the bell housing above the shift linkage bracket on an automatic). Turn on your key and if your guages now work, the sensor is bad." This was the problem for me. Nowhere else did this information appear and the dealers couldn't tell me this simple trouble shooting hint.

    Here is the link to the site that had the most information for chasing down the same problem. Turns out there are about 40 things that cause similiar problems for XJs, no matter the year model.

    http://forums.cnet.com/5208-6305_102...tag-w;forums06

    That doesn't work, go to : Jeep Grand Cherokee stalling fixed! on CNET Car Tech Forums page 3 of 5 or post #145of 290

    Hopefully this will save someone the headaches, not to mention the cost of a new fuel pump. I ran a hot line directly to mine and it wouldn't work, so made the logical assumption that the pump was bad. Turns out that if the sensor is shot, your pump isn't getting the right signal, hot line or not.

    Want to buy an 1998 XJ with a new fuel pump and Crank Sensor? Its going to be for sale. Good shape, too. Call LaDawn.

  2. #2
    Join Date
    Mar 2008
    Member
    #110
    Last Online
    April 6th, 2019
    Location
    Morrison, CO
    Age
    49
    4x4
    Toyota/Scout/Nissan
    Posts
    4,961
    User Name
    Patrolman
    Real Name
    Jeff
    Thanks Given
    182
    Thanked 346 Times in 298 Posts

    Default Re: XJ starting problem solved



    Congrats on figuring that out! I had a similar problem on Barbie's 95 Escort. Nobody could tell me what the root problem was. Finally dug a LOT (2+ years) and found it posted on a Escort group. Always something silly.

  3. #3

    Default Re: XJ starting problem solved



    I've heard of that CPS going bad/being the culprit when I ran around the Jeep boards. It made me glad to own something old enough not to have one.

    Congrats on tracking it down!

  4. #4
    Join Date
    Mar 2008
    Member
    #97
    Last Online
    May 13th, 2019
    Location
    Conifer, CO
    Age
    41
    4x4
    '92 Range Rover
    Posts
    7,000
    User Name
    Funrover
    Real Name
    Aaron
    Thanks Given
    79
    Thanked 141 Times in 121 Posts

    Default Re: XJ starting problem solved



    Glad you got it.. sorry I couldn't be much help!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
BACK TO TOP