Anyone know of shops that stock dana spicer hub bearings?

[JGRubicon]

I had one hub get damaged during disassembly, I went with the parts store alternative but now its ABS cable is too short, and the stock one does not fit in the bore.

I'm hoping a 4x4 shop in the are may actually stock the spicer parts. I'm specifically looking for 10021363 for a JK, but really just looking for advice on good places to call.

Even 4wheelparts lists a 2-4 day lead time. I'm going to call them, but just wanted to use the phone a friend option incase you all had any suggestions.

Thanks!

[JGRubicon]

Well, I couldn't find any nearby, so I just drilled out the really bad threads and ran a tap through what was left, it hit the torque spec, but I'm going to get the spicer part in a week or so, and I'm not going to trust that long term.

The dealer had 2 bearings in stock, and what a deal at $312 each. I'm not sure what I expected.

For $99 I'll take the wheel back apart in a week or two when I put on the tie rod and drag link.

[Max]

https://www.northridge4x4.com/part/r...ub-assembly-jk

I think I need to replace the front ones on my Jeep, and found this part too.

[Spieg]

Might try whisler bearing. https://trywhisler.com

[JGRubicon]

Thanks max, i did grab one from northridge after successfully tapping the original. It is a MUCH nicer part than what I got at the parts store. Northridge ships so fast too, I wish they still had their denver warehouse.

Thank you speig, I will look into them for the future!