Looking for a pair of 2- point (lap belt only) seat belts. Can be retractable or not...thinking someone who has removed their rear seat like in a jeep YJ or XJ. Probably has to be a bit older to have only the lap belt. Thanks!
Looking for a pair of 2- point (lap belt only) seat belts. Can be retractable or not...thinking someone who has removed their rear seat like in a jeep YJ or XJ. Probably has to be a bit older to have only the lap belt. Thanks!
___________
James Orofino
1970 CJ5
1958 Willys Wagon
Would new do?
https://www.seatbeltsplus.com/produc...xoCIGUQAvD_BwE
___________
Tom
-.- . ----- .-- - -.-.
Yes...that is the fallback option. Just trying to save a few bucks....or $40.
___________
James Orofino
1970 CJ5
1958 Willys Wagon
Talk me into making my jeep a permanent (or mostly) two-seater.
I'm holding onto my rear seat and seat belts if I wished to remove the back trunk and convert back to 4-seats.
Non-retractable. All hardware needed. Grey colored.
Sway me.
___________
James Orofino
1970 CJ5
1958 Willys Wagon
Logic says - the times / miles I've had more than two in the jeep is so dang low - and unlikely to change - that it'd be best to move the parts on (I can do the seat independent).
I'll get pix before long - poss Tues aft. The belts fasten to the floorboard and not to the seat frame. As the rear YJ seat is 4" from the floor / mounting of the seat, the length of the belts might be an issue. How high is your seat off of the floorboard (8-14")??
Didn't think about the low seat height...Will have to check....but guessing the seat is 6-8" up? Getting total length of belts will help to know. Thanks....
___________
James Orofino
1970 CJ5
1958 Willys Wagon
I'm missing one shoulder bolt [edit - scratch that - there are only three bolts - the center bolt fastens both belts]. One belt release is missing the "Press" label - but it works.
Measurements are to the ends of the webbing.
Thanks Jim...Lemme go take some measurements....I am also trying to determine if/when I might replace the existing seats etc. How interested in actually selling these are you? In other words, no pressure if you would prefer to keep your backseat set-up.
___________
James Orofino
1970 CJ5
1958 Willys Wagon
You're not committed to taking these - your call. I don't wish to keep'm. I doubt the back seat would be installed. I'm planning to sell off the seat (with flip hinge mounts) too.
You're helping me get into the mindset of clearing things out - a good thing.
Hey Jim...I will take the seat belts...its going to take a little 'finagling' to mount them to the existing seat frames, but that is better than mounting through the floor board at this time. In the long (maybe really long) run, I would like to replace the seats with more modern high back buckets and shoulder belts, but this will be a good solution for now, and sometimes now turns into the foreseeable future.
___________
James Orofino
1970 CJ5
1958 Willys Wagon
ship'm?
set'm out for pickup?
FR4x4 shuttle?
Clean-up run?
Realistically, I probably am not making it up to Ft Co anytime soon...probably easiest if they get shipped via USPS (or whatever shipping is easiest for you)? I am still willing to do $20 shipped to my address...Passing them along at the clean-up run (or possibly sooner if there is earlier run we can meet up on) might work. Feel free to discuss money and details via PM if that is preferable...thanks!
___________
James Orofino
1970 CJ5
1958 Willys Wagon