Bunch of Yota Stuff

[isotel]

FZJ80 Rear Full Float Axle Shafts (non E-locked) - $80
IFS Aisin Lockout Hubs $100
FJ80 Tail Lights OEM no Cracks.. $60
FJ80 Overhead light (Add a 3rd one in the Far Rear, there is a blank w/wires already run) $10
FZJ80 Headlights.. $60
FJ40 Stock Roll Bar $100
FJ40 Seat Brackets 75-78 $40

All Prices are OBO, so make an offer, id rather not have to ship

PM Me here or on mud
Photos on MUD
http://forum.ih8mud.com/co-colorado-...ml#post3422803

[Patrolman]

How long are the axle shafts for the FF and what is the spline count? I am building a FF rear for my 4Runner. Wondering if the shafts happen to be similar.

[isotel]

How long are the axle shafts for the FF and what is the spline count? I am building a FF rear for my 4Runner. Wondering if the shafts happen to be similar.

I will have to Measure, But if you used FJ80 Outer Spindle Parts your axle would be about 62" Wide.. They are 30 Spline.. But these are not like the Front range off road Full Float where they are splined on each end, these have a flange that bolts up to the Wheel Hub assembly OEM Style!

and they would offset your diff to the passenger side

[Patrolman]

Yeah, the current setup will be splined at the diff and bolt onto the flange at the outer, just like the OEM setup. Would prefer some sort of splines on the outer, but no biggie. Just wanted to compare these to what I will run. Might be able to use 1 or both for some sort of spares.