Curious if anyone here would be able to help me replace all 8 control arms and rear drive shaft (easy) so I can angle the rear pinion and remove transfer case drop. Control arms appear to be stock and in need of replacing, and I'm planning on purchasing the Currie Enterprise adjustable control arm set. Probably would replace front and rear track bars also, if suggested..... springs and shocks are relatively new so I'll leave those for now.
This work "appears" to be relatively straight forward but I've never done any suspension work before other than replacing sway bar links & I found a loose front lower control arm bolt the other day and tightened it down, which got rid of a horrible knocking when going over the rough roads..... but other than this I don't have the tools or know-how to change out suspension parts and would love some help.
I figured some of y'all are Jeep experts and have lots of tools and I would be happy to bring beer and pizza ..... or even pay $$$$ for help versus paying a shop way too much to do half-ass work (seems to be my experience with any shop these days).
Just throwing it out there, anyone?