Very interesting rig. Reminds me of a Scrambler.
https://cosprings.craigslist.org/cto/6155236749.html
Very interesting rig. Reminds me of a Scrambler.
https://cosprings.craigslist.org/cto/6155236749.html
looks like a Brute.
would be very carefull on this as who knows how they cut and welded the frame.
looks realy nice and the 117" wheel base will work realy nice.
but this thing screams for Tons at at least 37" tires at least
___________
Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized
That's a big girl! I kinda like it, but agree it needs proportionally bigger tires to make it right. For 117" WB, I'd probably have used a JKU frame and extended the very rear section of frame to support the extra bed length behind the rear wheels... less stress on the frame there than between the wheels
___________
~Not All Who Wander Are Lost~ (at least not all the time)
If the fdamecwork is done right it is not bad, buy I doubt its done the way it should be
___________
Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized
Since they swapped in the V8 from a Ram, I personally would have just put the Jeep body on the Ram. Might have been an easier swap. I agree that the framework may be questionable.
Ram frame is a touch wider.
The body mounts would have been a challenge.
If it was decent it could be a good start.
But it needs long arms 1 tons and 38-4
___________
Crazy- You call me crazy, but you wouldn't know crazy if Charles Manson was eating Fruit Loops on your front porch. Suiciadl tendancies- intatutionalized