A little 2 inch stock I had hangin around (Resever hitch)
Cut and drilled
Remember this is a trial run. My work, May not
A little 2 inch stock I had hangin around (Resever hitch)
Cut and drilled
Remember this is a trial run. My work, May not
___________
In a never ending search for the proper mix of dirt & rock !
Also had a chance to clock the remote filter
___________
In a never ending search for the proper mix of dirt & rock !
My kind of selfie..
___________
In a never ending search for the proper mix of dirt & rock !
Figured I cant make it to the run I can take a couple hour with Mr Sparkie..
___________
In a never ending search for the proper mix of dirt & rock !
Even got Dizzy to help clean the engine !
___________
In a never ending search for the proper mix of dirt & rock !
Currently on hold till further notice ..
___________
In a never ending search for the proper mix of dirt & rock !
Bizzy fingers and stuff. Didnt get pics but did have a chance to work the head a little.
Had the broke intake bolts so between heat and welding got them pulled.
Started major degraeseing & thread chasing Im might get some paint on them soon..
___________
In a never ending search for the proper mix of dirt & rock !
Do work!!!
Its amazing what some time, Elbow grease and a can of Duplacolor can do...
Redone the guides, checked and laped the valves.
Get my gasket set so I can match port the runners and put them together !!!
Doing a lot of labor stuff during this "JOURNEY"
___________
In a never ending search for the proper mix of dirt & rock !
Back when I did motor swaps for an engine exchange shop, I swear I spent just as much time cleaning parts as I did on the R&R. Owner's motto was "If you're willing to lick it, then it's clean enough to stick it" I never made any money at that place. 16 hr motor job would turn into at least twice that. But if I was working on my own vehicle...................totally different story.
All the engine work here is crates. All the other get a bath in the steamer. But my own stuff gets cleaned and painted.
___________
In a never ending search for the proper mix of dirt & rock !
Once in a while it nice to brake out the micrometer..
___________
In a never ending search for the proper mix of dirt & rock !
Had a chance to do some match porting on the heads...
___________
In a never ending search for the proper mix of dirt & rock !
Amazing what a little hot bath can do for greasy parts.
Every thing cleaned and etched, ready for porting.
Its all part of that idle hands stuff they keep talkin about !!
___________
In a never ending search for the proper mix of dirt & rock !
96EXXLTinCO (May 15th, 2016)
Idle hands and Paint cans...
What do you think of Orange and Black ???
___________
In a never ending search for the proper mix of dirt & rock !
Isn't that the color used in the 60's? I like it!
Pretty close to Chevy orange isn't it? I'd mess with people and tell em it's a 350.
Flat orange & flat black..
Iv never done this color combo before
Wait this ya see the valve covers..
___________
In a never ending search for the proper mix of dirt & rock !