OK, so I picked up a ZR2 2dr blazer last week because the son wanted to by the WJ. This morning I desided to break out the tape measure for some caparisons.
Wj
Front-gound to lowest point 8"
Slider- gound to sliders lowest point 13"
Rear diff-ground to bottom of diff 8"
Blazer
Front-ground to lowest point 8"
Frame-ground to frame 13.5"
Rear diff-ground to bootom of diff 7.5"
They relativly have the same clearences. I had the rough country 2" lift on my 92 and although it did lift as advertised it road like crap. So the alternative is a body lift. I am pretty sure that 32x11.50x15 will fit may have some minor rubbing at full steering lock. With the 32's I would roughly be at the same rear diff height as the WJ. With a 2" body lift 33's may be possible may have to get a different wheel offset to avoid rubbing. I do not plan on any major rock crawling with but it seems that it should be able to run the trails that I have already done without any mods. Any thoughts?
I do plan on getting the Synergy winch mount (hides between frame rails and bumper cover) which helps with approach angles, winch and fabbing some sliders.