Also a great binder site is www.binderbulletin.org
I have been getting tons of efi help from that site.
Doing a little research into what people have done for lifts for their Scouts...here are some starter links..one of them mentioned using CJ 4" springs which are cheap...See what you think:
http://www.geocities.com/MotorCity/D.../techtips.html
http://forums.off-road.com/ih-scout-...ring-over.html
http://forums.4wheeloffroad.com/70/6...elp/index.html
http://forums.4wheeloffroad.com/70/6...help/index.htm
I just googled 'international scout lifts' and a whole slew of suppliers popped up. The links that I posted discuss what people have done, SOAs, problems and various other suspension alternatives. This is the stuff that I usually try to find researching my junk as it contains answers to problems and what people did to fix them. It is a little tedious sorting out the chaff sometimes, but there are gems of info in there, too.There are also links to other sites on these links as well as some additional contact information that looked good. I didn't list any of the number of people that were selling springs, lift kits, or body lifts. If you want to research this, simply google what I did.
Hope that these help.
FEDERAL VALLEY MOTORS
3686 W 72 AVE
WESTMINISTER CO
PHONE # 303 429 1577
ASK FOR EARL , HE IS A LOCAL IH GUY WITH ALMOST ANY PART YOU NEED. HE IS NOT ON THE INERNET. HE IS REALLY CHEAP AND HIS WHOLE LIFE IS IH'S, SO HE IS VERY KNOWLEDABLE
And another from the Scout guys:
http://www.superscoutspecialists.com
This guy is getting IH soft tops in.
Suspension parts for 80/800 & Scout II:
http://www.topguncustomz.com/Store/p...s.php?S_ID=123
http://www.4-wheel-drive-lift-kits.c...-absorber.html
http://www.rockymountainsusp.com/scoutii.htm
http://www.eshocks.com/pro_ind.asp?M...dQRe&SubChar=Q
http://www.suspension.com/scout.htm
http://www.energysuspensionparts.com...+Scout+80+1965
http://www.sdtrucksprings.com/index....146&x=118&y=19
http://www.superlift.com/accessories/add-a-leaf.asp
http://4wheelonline.com/search.aspx?searchstring=scout
Swapping a carb for Fuel Injection or Throttle Body Injection? These links have some good information:
Some helpful links:
http://bobsbadbinder.com/project-tbi...tion-fixed/13/
http://www.binderplanet.com/forums/s...ad.php?t=57483
http://www.affordable-fuel-injection...uel-scout.html
http://www.justih.org/Binder-Bench/f...splay.php?f=21
Modifying your IH distributor for fuel injection. Go to the fuel injection section. Once again this did not post as a link directly to the page.
http://www.binderplanet.com/forums/showthread.php
This is for a better ECM, tunable using a laptop. Dynamic Fuel Injection modifies factory GM ECMs for most conversions using GM TBI or MPFI.
http://www.dynamicefi.com/
http://bobsbadbinder.com/dynamic-efi/25/#comments