[HR][/HR] Has anyone on here ever used one of these setups? It looks easier than doing a full on doubler setup. They have various conversions available like using the planetary gear from the 1350, 1354, 1356 they also have to where your final gearing will be either 2.4/1 or 2.7/1 low range. this multiplies the torque to the wheels. Below is the figures straight from their site using with the NP205;
[FONT=Arial Black][COLOR=#ff0000][COLOR=#f56502][COLOR=#ff0000][COLOR=#ffa500][SIZE=5]Strong Box + NP 205F = 19.25" - 2[SIZE=5]0.5[/SIZE]" long to center of rear yoke
1:1 Hi / Hi
~2:1 Hi / Low
2.7:1 Low / Hi
5.4:1 Low / Low
2.7:1 2wd Low without modifications to NP205
[/SIZE][/COLOR][/COLOR][/COLOR][/COLOR][/FONT]
[FONT=Arial Black][COLOR=#ff0000][COLOR=#f56502][COLOR=#ff0000][COLOR=#ffa500][SIZE=5][FONT=Arial Black, Gadget, sans-serif][COLOR=#ff0000](figures are for the 2.7:1 low range)[/COLOR][/FONT]
[URL="http://www.behemothdrivetrain.com/STRONG_BOX_UNDERDRIVE_KITS.html"]http://www.behemothdrivetrain.com/ST...RIVE_KITS.html[/URL]
[/SIZE][/COLOR][/COLOR][/COLOR][/COLOR][/FONT]
